MILKYWAY SPACE ODYSSEY WET ASH CATCHER

Description

This wet ash catcher from Milkyway Glass traps ash and debris before they reach the main chamber and adds a second stage of water filtration for cooling. It features a sandblasted Space Odyssey design and borosilicate glass construction, with a 14mm male joint available in 45-degree and 90-degree angles in clear, smoke, or teal.

Traps ash and debris before they enter the main chamber.. Adds a second stage of water filtration for a cooler draw.. Features a unique, sandblasted Space Odyssey design.. Constructed from tough, lab-quality borosilicate glass.. Check Your Bong's Joint: Is it 14mm or 18mm?. Identify the Angle: Is the joint angled (like on a beaker) or straight up (like a tube)?. Match the Joint Gender: This ash catcher has a male joint, so your bong must have a female joint.. Confirm Selection: Use the guides below to pick the matching size and angle.. Choose 45°: This is the standard for most beaker-style bongs or pipes with a joint that emerges at a diagonal angle. The 45° ash catcher will orient itself straight up and down when connected.. Choose 90°: This is designed for straight-tube bongs or rigs where the joint is perpendicular to the base, pointing straight up. A 90° ash catcher ensures your bowl remains level.. Choose 14mm: This is the most common size. A 14mm joint is slightly wider than the tip of a pinky finger. If a dime sits on top of the opening without falling in, it is likely a 14mm joint.. Choose 18mm: This larger size offers more airflow. An 18mm joint is noticeably wider, and the edge of a dime will slip partly inside.. A 45-degree ash catcher is typically for beaker-style bongs.. A 90-degree ash catcher is for straight tubes with vertical joints.. 14mm is the most common joint size in water pipes.. Match the size and angle to your piece to prevent tilting and spills.. Wet filtration cools smoke and traps ash effectively.. This results in a cleaner bong and a smoother draw.. The Space Odyssey design is sandblasted for a permanent finish.. This piece combines high-end function with detailed artistry.. Rinse First: Give the ash catcher a quick rinse with fresh water before its first use.. Add Water: Carefully fill the ash catcher with enough water to just cover the openings of the internal downstem or percolator. Do not overfill.. Attach to Bong: Gently insert the ash catcher's male joint into your water pipe's female joint. Ensure it's snug and secure.. Add Bowl: Place your packed bowl into the top joint of the ash catcher.. Test the Draw: Take a light pull without lighting the bowl. If water splashes into your mouth or the bong, remove a small amount of water from the ash catcher and try again.. Fill with water just enough to submerge the percolator slits.. Overfilling can lead to water splashing into the main pipe.. Always test the draw before lighting to check the water level.. A secure, airtight connection is crucial for proper function.. Change the water in the ash catcher daily for the best taste.. Use isopropyl alcohol and coarse salt for an effective deep clean.. Shake gently for 30-60 seconds to remove stubborn residue.. Always rinse thoroughly with warm water after cleaning.. Shop All Ash Catchers.

Specifications

Country of Origin

United States of America