HONEYBEE HERB CORE CYLINDER DOUBLE PERC GLASS ASH CATCHER

Description

This Honeybee Herb core cylinder ash catcher has a double percolator layout, with a lower chamber and a top chamber that each have percolator slits. It is offered in Clear with a 14mm male joint at 45° or 90°. The listing suggests filling the lower chamber about one-third with water and the top chamber about one-quarter to one-third.

Choose 90° if: Your water pipe's joint points straight up, vertical to the ground. This is common on most beaker bongs and straight tubes with a vertical downstem.. Choose 45° if: Your water pipe's joint comes out at a diagonal angle. This is typical for many scientific rigs and custom pieces where the joint is not perfectly vertical.. Fill the Bottom Chamber: Add just enough water to cover the percolator slits in the lower chamber (about 1/3 full).. Fill the Top Chamber: Carefully add water to the top chamber until its percolator slits are submerged (about 1/4 to 1/3 full).. Attach and Test: Connect the ash catcher to your bong and take a gentle test pull without a bowl. If water splashes into your bong, pour a little out from the top chamber.. Cleaning Supplies: You will need 91%+ Isopropyl Alcohol, Coarse Salt, and a sealable bag or container.. Process: Disconnect the ash catcher and empty the old water. Place it in a bag with alcohol and salt, seal it, and shake gently. For heavy buildup, let it soak for 30 minutes to an hour. Rinse thoroughly with warm water and let it air dry completely before use.. Shop All Ash Catchers. Browse Bongs & Rigs.

Specifications

Country of Origin

United States of America