HITTN 4 ARM TREE PERC GLASS ASH CATCHER

Description

This borosilicate glass ash catcher features a 4-arm tree percolator that diffuses smoke through multiple slits and attaches via a 14mm joint. It is available in 45 or 90 degree angles and multiple colors.

Acts as the first defense against ash and tar.. Adds a second stage of water cooling for your smoke.. Designed for use with most bongs and water pipes.. Reduces how often you need to clean your main water pipe.. A 4-arm tree perc sends smoke through multiple diffusion slits.. Borosilicate glass construction offers great chemical and heat resistance.. Available in multiple sizes and angles to fit most standard water pipes.. Choose the 45° angle for bongs with a slanted downstem, like beakers.. Choose the 90° angle for bongs with a vertical downstem, like straight tubes.. A dime can quickly help you tell if your joint is 14mm or 18mm.. You want noticeably smoother, cooler hits from your current bong.. You are tired of cleaning ash and resin out of your main chamber.. Your bong has a standard 14mm or 18mm female joint.. You need an accessory for either a beaker (45°) or straight tube (90°) design.. You prefer the high-diffusion performance of a tree percolator.. The tree perc diffuses smoke for a cooler and less harsh inhale.. It traps ash and resin, which greatly reduces bong cleaning time.. It works as an effective splash guard, keeping water out of your bowl.. Fill with Water: Add just enough cool water to cover the percolator slits on the arms.. Check Water Level: Gently tilt the ash catcher to ensure water doesn't spill out. If it does, pour a little out.. Attach to Bong: Securely insert the ash catcher's male joint into your bong's female joint. Make sure it's snug.. Insert Your Bowl: Place your packed bowl into the top joint of the ash catcher.. Test the Draw: Before lighting, take a gentle pull to test the airflow. You should hear the perc bubble without getting splashback.. Enjoy the Session: Light your bowl and enjoy a smoother, cleaner experience.. Only use enough water to submerge the percolator slits.. Overfilling can cause water to splash back into your bowl.. Always make sure the joint has a snug fit to prevent wobbling or air leaks.. Tree percs provide better smoke cooling compared to simpler designs.. Showerhead percs are often easier to clean and have less drag.. Honeycomb discs create a dramatic visual of stacking bubbles with low resistance.. Empty Old Water: Start by dumping the dirty water from the ash catcher.. Add Cleaning Solution: Pour in a mixture of 91%+ isopropyl alcohol and coarse salt.. Seal and Shake: Cover the joints with your fingers or plugs and shake vigorously for 30-60 seconds. The salt scrubs the resin.. Soak if Needed: For stubborn buildup, let it soak for 30 minutes.. Rinse Thoroughly: Rinse completely with warm water until all alcohol and residue are gone. Let it air dry before use.. Rinsing often helps prevent heavy resin from building up in the arms.. Isopropyl alcohol and coarse salt will effectively scrub away tar.. Always rinse well with water to remove all of the cleaning solution..

Specifications

Country of Origin

United States of America