CORE REACTOR BARREL QUARTZ NAIL | YL

Description

This core reactor barrel quartz nail is made from 100% fused quartz. Its barrel design has an inner core that increases thermal mass, and the frosted joint is listed as creating an air-tight seal with the rig. Options are Female 18mm, Male 10mm and Male 14mm.

Evidence: The nail is made from 100% fused quartz for clean flavor.. Evidence: Its barrel design with an inner core significantly increases thermal mass.. Evidence: The frosted joint creates a secure, air-tight seal with your rig.. Determine Your Joint Size: Most rigs use 10mm, 14mm, or 18mm joints. A US dime is just under 18mm, making it a good visual guide. This nail is available in 14mm (most common) and 18mm (for larger rigs).. Identify the Gender: If your rig's joint is wide and you place the nail inside it, you need a Male nail. If your rig has a narrow, protruding joint that the nail fits over, you need a Female nail.. Select the Angle: If your rig's joint points straight up (vertical), you need a 90° angle. If it comes out at a slant, you need a 45° angle.. Evidence: This nail is available in 14mm and 18mm joint sizes.. Evidence: Choose a 90° angle for vertical rig joints or a 45° angle for slanted joints.. Evidence: Male nails fit into female rig joints.. Evidence: The solid inner core and thick walls create a heat sink for thermal retention.. Evidence: Extended heat retention is ideal for low-temperature dabbing.. Evidence: It is designed for a snug fit with a 20mm eNail heating coil.. Heat the Banger: If using a torch, heat the barrel and core evenly for 30-45 seconds. Avoid heating the joint. If using an eNail, set your controller between 500-650°F.. Wait for Cooldown: Let the nail cool for 45-60 seconds. This is key for a low-temp dab that preserves flavor.. Apply Concentrates: Use a dab tool to apply a small amount of concentrate to the banger's inside floor.. Cap It: Immediately place a carb cap on top to trap the heat and vapor.. Inhale: Inhale slowly and steadily from your rig.. Clean Immediately: After your dab, use a cotton swab (the "q-tip tech") to wipe out any residue while the nail is still warm.. Evidence: Heat the nail for 30-45 seconds with a torch or set your eNail to 500-650°F.. Evidence: A cooldown period of 45-60 seconds is crucial for flavor preservation.. Evidence: Use a carb cap to maximize vapor production at lower temperatures.. Evidence: Clean the banger with a cotton swab while it is still warm to prevent buildup.. Evidence: The Core Reactor Barrel is best for heat retention and eNail compatibility.. Evidence: Opaque bottom bangers are specialized for low-temperature and cold start dabs.. Evidence: Terp Slurpers are designed to maximize flavor and handle larger concentrates.. After Every Dab (Q-Tip Tech): While the nail is still warm (not red hot), use one or two dry cotton swabs to soak up any leftover oil. This prevents residue from baking onto the surface.. For Stubborn Residue: If you have buildup, dip a cotton swab in a small amount of isopropyl alcohol and swab the warm nail. The alcohol will boil off, taking the residue with it.. Deep Cleaning: For heavy buildup, you can soak the cooled nail in an isopropyl alcohol solution or a dedicated glass cleaner. Rinse it thoroughly with water and let it dry completely before heating again.. Evidence: Use a dry cotton swab on a warm nail to remove fresh residue.. Evidence: Isopropyl alcohol can be used on a warm nail to remove stubborn spots.. Evidence: Regular cleaning prevents "chazzing" and preserves the nail's lifespan.. Evidence: Heat the nail once before its first use to burn off any residues.. Evidence: Replace your nail if it becomes permanently stained, cloudy, or chipped.. Quartz Bangers & Dab Nails - Find the perfect nail for any rig or preference.. Carb Caps - Control your airflow and maximize your vapor.. Terp Pearls - Add motion to your oil for even vaporization.. Dab Rig Cleaning Supplies - Keep your gear fresh and functional..

Specifications

Country of Origin

United States of America