Colorful Swirl Handblown Glass Showerhead Perc Ash Catcher

Description

This is a handblown borosilicate glass ash catcher with a showerhead percolator that traps ash and debris while cooling and filtering smoke. Each piece has a one-of-a-kind swirl pattern, stands about 4 inches tall, and has a 90-degree male 14mm joint available in Crystal, Mocha, Shoreline, Coasta, Glacier, or Sunset.

Traps ash and debris to keep your main piece cleaner.. A showerhead percolator cools and filters smoke.. Made from durable, heat-resistant borosilicate glass.. Each handblown piece features a one-of-a-kind colorful swirl pattern.. Check Joint Size: Does your bong have a 14mm or 18mm female joint? Match it with the corresponding male joint on this ash catcher.. Check Joint Angle: Look at your bong's downstem joint. If it angles out (like on most beaker bongs), you need the 45° version. If it stands straight up, you need the 90° version.. Confirm Joint Gender: This is a male ash catcher, designed to fit into a female joint on a water pipe.. Consider Balance: At about 4 inches tall, this ash catcher is compact but adds weight. It's best for medium-to-large bongs that won't easily tip.. Review Cleaning Access: The showerhead perc is simple in design, making it easier to clean than more complex percolators.. Available with 14mm or 18mm male joints.. Choose between a 45° or 90° angle.. A 45° angle is typical for beaker-style bongs.. A 90° angle is common for straight tubes with vertical joints.. The showerhead perc offers balanced diffusion with low drag.. Borosilicate glass construction provides thermal resistance and strength.. Choose the 14mm or 18mm option to match your bong's joint diameter.. Select the 45° angle for beaker bongs or angled joints.. Select the 90° angle for straight tubes or vertical joints.. Showerhead percs cool smoke effectively with minimal drag.. The diffusion process results in smoother, less harsh hits.. Handblown construction gives each piece a unique colorful pattern.. Fill with Water: Add a small amount of clean water to the ash catcher, just enough to submerge the showerhead perc's slits.. Connect to Bong: Insert the male joint of the ash catcher into the female joint of your water pipe. Ensure it's a snug, secure fit.. Attach Your Bowl: Place your 14mm or 18mm male bowl into the female joint at the top of the ash catcher.. Pack and Use: Pack your bowl as you normally would and enjoy a cleaner, smoother session.. Empty and Rinse: For best results, empty the dirty water from the ash catcher after each session to prevent buildup.. Fill with enough water to cover the percolator slits.. Ensure a snug fit at the joint connection to prevent leaks.. It provides better filtration than a dry catcher.. It is significantly easier to clean than a complex tree perc.. Empty and Rinse: Dump out any old water and rinse the piece with hot water to loosen residue.. Add Cleaning Solution: Pour in a small amount of 91%+ Isopropyl Alcohol and a teaspoon of coarse salt (like Epsom or sea salt).. Seal Openings: Use your fingers or cleaning plugs to seal the joints.. Shake Vigorously: Shake the ash catcher for 30-60 seconds, allowing the salt to scrub the inside surfaces.. Soak if Needed: For heavy buildup, let the solution sit for 10-15 minutes before shaking again.. Rinse Thoroughly: Pour out the dirty solution and rinse thoroughly with warm water until all alcohol and salt are gone. Let it air dry.. An alcohol and salt mixture is effective for removing resin.. Frequent rinsing prevents heavy buildup and makes deep cleaning easier..

Specifications

Country of Origin

United States of America