6 INCH TRIPLE HONEYCOMB PERC ASH CATCHER

Description

Standing 6 inches tall, this glass ash catcher has three honeycomb percs, each a perforated disc for diffusion. It is meant to catch ash and residue as a barrier for the main piece. Joint size, 14mm or 18mm, needs to match the piece it attaches to.

Acts as a primary barrier against ash and residue.. Features three honeycomb percs for diffusion.. Stands 6 inches tall for significant filtration capacity.. Helps reduce how often you need to clean your main piece.. Its 6-inch height provides plenty of space for diffusion.. Three honeycomb discs create a dense field of bubbles.. The design catches ash to keep your primary piece clean.. Built from glass for pure flavor and easy monitoring.. Smoke is forced through three separate perforated discs.. This process creates massive diffusion and rapid cooling.. The bubble-stacking action is effective and impressive to watch.. Joint Size: Does your piece have a 14mm or 18mm joint? You need to match it.. Joint Gender: Does your piece have a female joint (where the bowl goes in)? If so, you need a male-jointed ash catcher, and the other way around.. Joint Angle: Does your joint stem point straight up (90 degrees) or out at an angle (45 degrees)? Match the angle to keep the ash catcher upright.. Clearance & Stability: Is there at least 6+ inches of space for the ash catcher? Think about the added weight—make sure your bong has a stable base to prevent it from tipping.. An incompatible ash catcher cannot be used.. Measure your joint size; do not guess.. Match the joint angle (45° or 90°) to keep it upright.. Ensure your bong is stable enough to support the added weight.. Empty & Rinse: After each use, empty the dirty water and rinse with warm water to prevent buildup.. Add Cleaner: For a deep clean, pour in your favorite glass cleaner or an isopropyl alcohol/salt mixture.. Seal & Shake: Cover the joints safely and shake gently to move the solution around.. Soak (If Needed): Let the ash catcher sit for at least 30 minutes for tough, clogged percs.. Rinse Thoroughly: Flush with warm water until all residue and cleaning solution are gone.. Dry Completely: Let it air dry fully on a soft towel before storing or reattaching.. Rinse the ash catcher right after your session ends.. Use isopropyl alcohol and salt for an effective deep clean.. A 30-minute soak can help dissolve difficult residue.. Always rinse completely to remove all cleaning agents.. Before: Inspect the glass and fill with minimal water.. After: Empty dirty water quickly to make cleaning simple.. Handle with care to avoid stressing the joints.. Shop All Ash Catchers.

Specifications

Country of Origin

United States of America